main technical parameters
1. Model: Q11F-16T
2. Select high-quality copper materials and adopt red punching hot forging process;
3. The working medium is water, oil, gas, etc.(depending on the specific conditions of the valve);
4. Working temperature t≤120℃;
5. The nominal pressure is 1.6MPa.
Installation of PPR ball valve
① Remove the connecting edge cap, PPR pipe flange and O-seal ring on the valve body respectively;
② Put the removed connecting edge cap on the PPR pipe in the original direction;
③ Muse the PPR pipe flange and the PPR pipe fuser and then combine them. After cooling, put the O-shaped sealing ring on the steps of the PPR pipe flange, and finally tighten the connecting nut and the valve body.
